Rotary encoder TBD

This product can only be requested
Price on request

Prices plus VAT plus shipping costs

Delivery time approx. 6 weeks

Product group:

Design:

Flange and shaft:

Housing material:

Resolution:

Code type:

Profile:

Connection cover:

Interface:

Electrical and/or mechanical variant:

Bestellschlüssel

TBD 58 K 4096 R Z C2 A D 01
Recording of the angular position and revolutions by means of Hall sensors - multiturn version... more
Product information "Rotary encoder TBD"

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.

Product category: Rotary encoders
Inkremental or absolute: Absolute
Interface: PROFIBUS
Single- or Multiturn: Singleturn
Design: 58 mm, 64 mm, 65 mm, 66 mm, 90 mm, 105 mm, 125 mm
Housing material: Aluminium, Stainless steel 1.4305, Stainless steel 1.4404
Flange and shaft: Cam switch flange, shaft for ZRS, Clamped flange, shaft 10 mm with disk spring, Clamped flange, shaft 10 mm with feather key, Clamped flange, shaft 10 mm with flattened area, Clamped flange, shaft for measurement gear ZRS, Mounting flange, shaft 12 mm, Mounting flange, shaft 12 mm with feather key, Special version (see data sheet), Synchro flange, shaft 6 mm, Synchroniser flange, clamped shaft, 12 mm inside diameter , Synchroniser flange, shaft 6 mm with flattened area, Synchroniser flange, shaft 12 mm, Synchroniser flange, shaft 12 mm with feather key
Resolution: 4096 steps/360°<) or steps/drum circumference (248mm) with draw wire version, 8194 steps/360°<) or steps/drum circumference (248mm) with draw wire version
Code type: Binary
Measuring range: 10 measuring lengths in metres for the draw wire version. Possible values: 6 and 10, 4096 revolutions
Profile: Class 2 according to encoder profile No. 3.062
Connection cover: Connection cover
Electrial and/or mechanical variant: Compatible with rotary encoder model KRD, Standard
Available downloads:
Viewed