Rotary encoder TRT/S3 SIL2

SIL2 PLD
Rotary encoder TRT/S3 SIL2
This product can only be requested
Price on request

Prices plus VAT plus shipping costs

Delivery time approx. 6 weeks

Product group:

Design:

Flange and shaft:

Housing material:

Resolution:

Code type:

Measuring range:

Profile:

Electrical connection:

Interface:

Electrical and/or mechanical variant:

Bestellschlüssel

TRT 58 KP A 8192 D 4096 S3 M T 01
Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn... more
Product information "Rotary encoder TRT/S3 SIL2"

Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 and 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. To achieve the SIL2 level, the TRT/S3 contains addtitional internal monitoring mechanisms as well as safe communication via PROFIsafe. The PROFIsafe protocol is implemented according to the PROFIisafe Profile for Safety Technologie version 2.4 (PNO Order No. 3.192)

Product category: Rotary encoders
Inkremental or absolute: Absolute
Interface: PROFIsafe over PROFINET
Single- or Multiturn: Multiturn
Design: 58 mm, 64 mm, 65 mm, 66 mm, 105 mm
Special feature: SIL2/PLd
Housing material: Aluminium, Stainless steel 1.4305, Stainless steel 1.4404
Flange and shaft: Cam switch flange, shaft for ZRS, Clamped flange, shaft 10 mm with disk spring, Clamped flange, shaft 10 mm with feather key, Clamped flange, shaft 10 mm with flattened area, Clamped flange, shaft for measurement gear ZRS, Mounting flange, shaft 12 mm with feather key, Special version (see data sheet), Synchroniser flange, clamped shaft 12 mm with groove for feather key, Synchroniser flange, shaft 6 mm with flattened area, Synchroniser flange, shaft 12 mm with feather key
Resolution: 4096 steps/360°<), 8192 steps/360°<), 16384 steps/360°<)
Code type: Binary code, position value as double word (e.g. for Simatic TIA portal with safety advance), Binary code, position value subdivided amongst two words, Binary code, position value subdivided amongst two words, 1st word multiturn data, 2nd word single-turn data, resolution not adjustable
Measuring range: 4096 revolutions
Profile: PROFIsafe, SIL2
Electrical connection: Cable outlet radial, Connector outlet radial, Standard, 3 connectors, radial
Electrial and/or mechanical variant: Aligned device connectors, customer-specific, Like variant with aligned device connectors but with gear wheel ZRS-12-12-A13, Standard
Available downloads:
Viewed